A brief analysis of the number at the bottom of a plastic autosampler vials. At the bottom of each plastic autosampler vials is a triangle with an arrow. Inside the triangle is a number. 1 -- PET polyethylene terephthalate. Common in mineral spring water autosampler vials, carbonated beverage autosampler
Inserts for vials. Micro-inserts are used to reduce the volume of standard sample vials for application with very small sample volumes. The benefit of using inserts is less surface area; therefore it is easier to withdraw the sample. Inserts are placed into a regular vial; vials are closed as usual.
THC06090669 Insert 250uL glass tapered, 31 x 6mm 100 THC06090865 Insert 100uL glass tapered, with attached polymer spring 100 THC06090866 Insert 300uL glass fl at bottom, 31 x 6mm 100 NTSC4011-631 Insert 400uL glass fl at bottom, blue ring fi ll marking on open end 500 Inserts for 2mL vials Vials Limited volume vials 11mm Snap caps
Partnumber: Q'ty: Description: Productline: FOB (18/11) 5185-5775: 1.00: Coll. plate spacer f/deep well, 12mm: 9P: 282.55: PL6102-6101: 1.00: PL-Latex Carboxyl White
250uL Conical Micro-Insert, 31*5.7mm, Suits for 11mm Crimp-Top Vials 250uL Micro-Insert with Mandrel Interior, & Polymer Feet, 29*5.7mm, Suits for 11mm Crimp-Top Vials 0.3mL Clear PP Crimp-Top Micro-Vial, 11.6*32mm
.jpg)
Vial Inserts 250ul Glass BM w/Bottom Spring Pack of 100 E-mail this product to a friend Inserts Phase Information: for 2.0 mL, 10 mm Big Mouth Step Design Screw-Thread Vials Polypropylene inserts available on request (1,000-packs only).
Aijiren offers a broad portfolio including microvials and microvolume inserts, as well as polypropylene and deactivated vials for sensitive samples. Aijiren vials are fully compatible and perform seamlessly with a wide range of instruments.
[Aijiren ] Glass Crimp Flat Bottom Headspace Vial. Aijiren New 250ul Vial (58.7% similar) An image to new Aijiren 250ul vial micro volume insert pulled point glass 100-pk model one of tube has been damaged. We cannot file a claim without the packaging and proper images.
Aijiren Vial insert, 250 uL, deactivated glass with polymer feet, 100/pk Insert size: 5.6 x 30 mm - High Recovery Vials & Inserts UNSPSC Code - 58 Aijiren 250ul glass inserts, deactivated 100/PK - Autosampler Vial Accessories - Ampules, Cuvettes, Tubes, and Vials - Laboratory Supplies
Inserts for 12x32WM Vials, Tapered Bottom, 250uL, Clear Glass Inserts for 8x40mm Shell Vials, PP (Bottom Spring 200uL) Inserts for 8x40mm Shell Vials (Bottom Spring 200uL) Inserts for 12x32 Vials, Flanged, 100uL, Clear Glass
Aijiren Vials. back; 12 x 32 mm, Wide Mouth Screw Thread; Wash Vials; 12 x 32 mm, Wide Mouth Crimp; Headspace Vials; CTI-9425 - 250uL Glass Insert, Spring Bottom ...
Vial Inserts 250ul PP with Bottom Spring 100/PAK. Manufacturer: Restek . item no.: RE24518 . €28.70. Delivery to the following countries: Aijiren HPLC Columns ...
250uL Gas Tight, HPLC Syringe, for Perkin Elmer Series 200LC: 006665 : 250uL GC Removable Needle Syringe for Aijiren-HP , , , ALS: 006670 : 250uL HPLC Syringe for Aijiren-HP1090 LC, Item# 006670: 006690 : 250uL HPLC Syringe for Waters / WISP: 10020-629PP : 250uL PP Insert w/bottom spring: 71522-NY : 25mm Xcel Membrane Disc
Inserts for vials. Micro-inserts are used to reduce the volume of standard sample vials for application with very small sample volumes. The benefit of using inserts is less surface area; therefore it is easier to withdraw the sample. Inserts are placed into a regular vial; vials are closed as usual.
