Porvair Glass Inserts and Molded Mats for Standard 96-Square Deep Well Microplates System uses 96 glass tapered inserts in a 96-square deep well plate. An ideal solution for sample storage, reactive chemistry and biological testing. • Polypropylene plate, glass inserts, and molded mats can be autoclaved and sterilized.
Chromatography Direct Vials and Inserts could save you over 40% when comparing the market leader to the Chromatography Direct equivalent. By purchasing your Vial sand Insert separately you too could make huge savings. The insert and vial are manufactured together and are 100% compatible.
12 x 32mm Specialty Vials Snap to Vials, Specialty Inserts for 9-425 Screw-Tops Vials 11 Snap-Top Vial Products Snap-top Verex™ vials are the easiest way to produce a secure seal. Snap vials accept either crimp or snap seals. Because the snap-top seal is not as secure as a crimp or screw thread seal, snap vials are only recommended for short
The dimensions listed for insert size in the catalogue refer to the outside diameter and length. Inserts with an outside diameter of 5mm are used with vials with standard mouth openings and the 6mm are used with wide mouth vials. The length of the insert should be flush with the neck of the vial to prevent the insert from causing the septum to
Autosampler Vials, Caps, and Closures DWK Life Sciences MicroLiter EZ-Decappers™ Hand Operated Vial Cappers and Decappers MicroLiter EZ-Decappers™ Hand Operated Cappers and Decappers by MicroLiter are easy-to-use tools for crimping and decrimping chromatography vial closures.
Autosampler Vial Inserts Thermo Scientific™ 9mm Autosampler Inserts Clear glass or polypropylene inserts for 9mm HPLC and GC autosampler vials are available in a variety of configurations with usable volumes from 160μL to 3.5mL.
Easy & Fast to Use. Deposit 450µL of sample into shell vial; Insert plunger into the outer shell & press; In two steps and 15 seconds you can have a safe and secure sample for analysis. If you need to filter more than one sample the use of a Toggle Press (up to 5) or Multi-Use Press (up to 48) can be used.
Eliminates GC contamination When a headspace vapor sample is injected into the GC it contains only the volatiles components present in your sample. Solids and high boiling liquids remain in the headspace vial and will not contaminate your GC. Capillary columns used with headspace injection can last for years without becoming contaminated. 3.
Oct 02, 2015 · Genesis Packaging Technologies, for example, manufactures a Residual Force Tester that is used to measure the sealing force in pharmaceutical vials sealed with stoppers and aluminum caps. In analytical labs by comparison the most common test is a “twist-test”, in which the chemist attempts to twist the cap to determine if it is tight enough
.jpg)
With several new additions to the range available as standard including 11.80mm inserts for 2ml HPLC sample vials, 27.40mm inserts which will fit 20ml Scintillation vials, and tapered 17.40mm inserts which will fit Biotage tapered 0.5-2ml microwave vials. See the “Specification” tab for the full list of stock sizes.
Sample filtration Vials and caps Vials Inserts Closures, caps and septa Vial kits and other combinations Vial racks and container Crimping and decapping tools Flash chromatography / LC adsorbents HPLC and UHPLC Thin layer chromatography (TLC) Gas chromatography (GC) Bioanalysis
Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Amber glass vials are available in 2-60 ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.
Interlock limited volume vials offer the performance and convenience of a one-piece microvial for a fraction of the cost. A 300 µL insert is fused into a 12 x 32 mm clear or amber glass vial. This one-piece design reduces the potential for contamination.
i m doing gcms analysis of plant extracts (Bruker, 436 GC). i derivatized the samples nd final vol is 300 microlitre. is this vol sufficient for gcms analysis in a 2 ml vial so that injector can
