SIS manufactures a number of standard size sample vials for GSV mass spectrometers. Vials are constructed of Borosilicate glass (Pyrex). O.D. tolerances are ±0.02 mm (0.001 inch) and length tolerance is ±0.20 mm (0.008 inch). The ends are cut clean and straight. Vials are clean and contamination free.
Vials To ensure the stability and performance of chromatography and spectroscopy analyses, Aijiren offers a range of laboratory supplies to meet the challenges of any application. Our extensive portfolio includes gas management products, including gas purifiers, tubing, traps, flow meters, and leak detectors.
Inserts from Aijiren. To meet your microsampling needs, Aijiren has a variety of microvolume inserts with capacities and designs that can transform our vials from full-capacity to limited volume with one simple step. These inserts are compatible with our wide opening screw top, crimp top, snap top vials and 8-425 vials.
6 ®VWR AUTOSAMPLER VIALS, INSERTS, AND CLOSURES | PLACE YOUR ORDER TODAY AT VWR.COM, OR CALL 1.800.932.5000 VWR® 10mm Wide Opening Screw Thread Vials 2mL, 12x32mm 10mm Wide Opening Screw Thread Vials and Inserts • 10-425 thread finish • Vials feature a write-on patch with graduation for convenient sample identification
2ml Amber HPLC Autosampler Vial, diameter 12mm, height 32mm, 2ml Amber HPLC Autosampler Vial with 9-425 screw top cap are widely used in standard HPLC and GC applications. 2ml Amber HPLC Autosampler Vial are available in all common autosamplers. To their technical geometry, preferentially they are in Aijiren, HTA, Shimadzu, Thermo, Balinese
, and autosamplers Screw top 4 mL glass vials are a custom fit to the Aijiren autosampler tray for use as sample as well as wash vials. Vials with fill marks are also appropriate for use as wash vials and waste vials in and autosamplers.
glass inserts are made from 1st hydrolytic class glass Small opening vials and inserts are more difficult to fill than wide opening sample containers Broad variety of different technical designs The longer the conical part of the insert the better the conditions for the needle
.jpg)
Autosampler vials & caps for HPLC, LC/MS, GC and GC/MS There’s a Thermo Scientific vial & closure for every HPLC, GC, MS instrument, application, and budget. Screw Vials, Caps, Septa, Inserts & Kits
PTFE-free—ideal for PFAS analysis (e.g., EPA 537) and other PFAS-sensitive methods. Note: Polypropylene vials and caps prevent sample contamination from PTFE coated septa. However, since polypropylene caps do not reseal, evaporation occurs after injection. Multiple injections from the same vial are therefore not possible.
Autosampler Vial Inserts. Clear glass or polypropylene inserts for 8mm, 9mm, 11mm or 13mm HPLC and GC autosampler vials are available in a variety of configurations with usable volumes from 125µL to 3,5mL. 8mm Autosampler Inserts » 9mm Autosampler Inserts » 11mm Autosampler Inserts » 13mm Autosampler Inserts »
Aijiren clear glass and polypropylene inserts and high recovery vials ensure you extract the maximum possible amount of your precious sample. They are the perfect fit for HPLC and GC instrument platforms across a wide variety of applications, including pharmaceutical, environmental, energy and fuels, forensics, materials science, biopharmaceutical, proteomics, and metabolomics.
If only a limited volume of sample is available, you will have to choose between using an insert for your regular autosampler vial, a microvial or a high recovery vial. Note: Most 12x32 mm autosampler vials hold between 1.5mL to 2.0mL of liquid, depending on where the manufacture measures the vial full.
Aijiren 2 mL screw top vials are constructed from from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 9 mm screw caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
If only a limited volume of sample is available, you will have to choose between using an insert for your regular autosampler vial, a microvial or a high recovery vial. Note: Most 12x32 mm autosampler vials hold between 1.5mL to 2.0mL of liquid, depending on where the manufacture measures the vial full.
Sample Vials; Scintillation Vials; Vial Racks and Storage; Autosampler Vial Inserts; Autosampler Vial Inserts 1 – 30 1132 . Interest Areas. Life Science ...
