After a sample has been collected, lower and press lightly on the inner tube, which positively seats the PTFE seal, locking the sample column into place. This unit has a tapered bottom with an approximate diameter opening of 1/2", (1.3 cm) and a sample capacity of 200 mL.
WHEATON® Glass Snap Cap Bottles, 60mL or 2oz, Clear, 45mm Finish. (60 mL Bottle, Sample, Type III Clear, Snap Cap) 60mL Glass Sample Bottle, Clear, Snap Cap. Pre-attached low density polyethylene snap caps; Ideal for collecting, storing, and exhibiting sample in the lab or field; Packaged in corrugated trays with partitions
.jpg)
BD Microtainer ® blood collection tubes are designed for ease of use, helping ensure that a quality capillary blood sample is collected. These wider-diameter tubes feature the BD Microgard ™ closure, which has an integrated collection scoop and improved mixing ability.
Micro-inserts are used to reduce the volume of standard sample vials for application with very small sample volumes. The benefit of using inserts is less surface area; therefore it is easier to withdraw the sample. Inserts are placed into a regular vial; vials are closed as usual. As an alternative for small volumes you may use micro-vials with
Dec 12, 2014 · 11. The injection volume will determine how much sample/standard volume should be in the vial, e.g. a 100μl injection must have 600μl in the vial. Typically, the HPLC sample vials contain at least one mL. If the available sample volume is limited, there are inserts (250ul total volume) that fit inside the standard vials.
Micro Inserts for 2ML Vials / Shell Vials and PP Conical Vials. These inserts all have a nominal O.D. of 6mm and 5mm to fit CCI TM wide opening vials. Polyspring inserts are self-centring with a spring to provide a cushion against needle contact. Precision point inserts residual sample losses. Inserts starts from 2ul residual sample volume.
Glass Insert : These types of small volume inserts are available for use with 9mm, 2ml Autosampler Vials. Made with high precision. These inserts offer reliability and will not contaminate your samples. Simply drop them into your autosampler vials for use. These inserts are the very best available today for HPLC, GC, LCMS & GCMS.
THC06090669 Insert 250uL glass tapered, 31 x 6mm 100 THC06090865 Insert 100uL glass tapered, with attached polymer spring 100 THC06090866 Insert 300uL glass fl at bottom, 31 x 6mm 100 NTSC4011-631 Insert 400uL glass fl at bottom, blue ring fi ll marking on open end 500 Inserts for 2mL vials Vials Limited volume vials 11mm Snap caps
Outside Vials are a combination of Type I low extractable borosilicate glass inserts and clear or amber thermoplastic polymer outer vial shells. Only the glass contacts the sample and the seal. Item No. 302511CP-12 The new Finneran 4-Fin Polypropylene 11mm Crimp/Snap Ring™ vial
Aijiren clear glass and polypropylene inserts and high recovery vials ensure you extract the maximum possible amount of your precious sample. They are the perfect fit for HPLC and GC instrument platforms across a wide variety of applications, including pharmaceutical, environmental, energy and fuels, forensics, materials science, biopharmaceutical, proteomics, and metabolomics.
1000mL Filter System, 0.22μm PES Filter, 90mm Diameter, Sterile • 229708 • Easy-to-read molded graduations marks on bottle top filter Bold easy-to-read printed membrane and pore size for easy identification Curved bottle design for easy handling Printed lot number and expiration date on every bottle top Improved filter support provides faster flow rates Angled hose barb adapter fits three
There are 3 types of micro-insert, 29*5mm 150uL micro-insert with mandrel interior&polymer feet, 150uL conical bottom micro-insert and 250uL flat bottom micro-insert. All three types of micro-insert can be adapted to 8-425 2ml Autosampler Vials.
- Volume: 10ml, 30ml, 50ml & 100ml with 20mm Vial Neck We are offering our clients a wide gathering of Amber Glass Vials. This glass vials is fabricated by our experts who utilization
300ul 9mm screw thread PP micro vial clear with insert screw cap 2ml-9-SV1001 - Aijiren Products Made In China, China Manufacturer. Temperature resistant from -20 °C up to 100 °C Available With 9-425 Seals with centre hole or Closed top . 9mm screw thread,plastic vial,micro volume vial
The volume will vary depending on the length and the style of insert. Micro volume vial inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial. Micro volume vial inserts can be used with screw tops, crimp top, or
