250ul Micro Volume Glass Insert,Cone Bottom With Spring Feet. , Find Complete Details about 250ul Micro Volume Glass Insert,Cone Bottom With Spring Feet.,Micro Volume,Glass Insert,Glass Insert from Laboratory Bottle Supplier or Manufacturer-Ningbo Excellent New Material Co., Ltd.
250ul Insert with mandrel interior and polymer feet, 29*5.7mm; suits for ND9 Vials: I250: 250ul Micro-Insert,31*5mm,clear glass,flat bottom; suits for ND8 Vials: I300: 300ul Micro-Insert,31*6mm,clear glass,flat bottom; suits for ND9 Vials: V181: 1ml shell vials,1st hydrol glass,clear, 8mm PE-Plug,soft, without insertion 8.2*40mm: VP91
THC06090669 Insert 250uL glass tapered, 31 x 6mm 100 THC06090865 Insert 100uL glass tapered, with attached polymer spring 100 THC06090866 Insert 300uL glass fl at bottom, 31 x 6mm 100 NTSC4011-631 Insert 400uL glass fl at bottom, blue ring fi ll marking on open end 500 Inserts for 2mL vials Vials Limited volume vials 11mm Snap caps
The following accessories are used to measure micro-volume samples. The figure shows the absorption spectrum obtained by measuring spectra of 50 μL herring spermatozoa (a) and bovine serum-albumin (b) using a super-micro cell holder and cell. Spectra with good S/N ratios can be obtained even in the ultraviolet region.
1 x 250uL Micro-Insert with Mandrel Interior and Polymer Feet, 29x5.7mm for 9mm vials, 100/pk, CV2044 + $16.38 1 x 250uL Micro-Insert, conical bottom, 31x6mm for 9mm vials, 100/pk, CV2046 + $10.96 1 x 300uL Micro-Insert, Flat Bottom, Clear, 31x6mm for 9mm vials, 100/pk, CV2050 + $6.19
1. 1.5ml/2ml Short screw Thread ND9, wide opening, 9mm thread hplc vial with matched PP Screw caps ND9, PTFE/silicone septa & Micro-Insert 2. Short screw Thread ND9 vial is designed to ensure proper centering of limited volume inserts, eliminating missed injections.
Volume: 20-60ml Payment: T/T Factory 250uL Conical Micro-Insert, 31*5.7mm, Suits for 11mm Crimp-Top Vials 250uL Micro-Insert with Mandrel Interior, & Polymer Feet ...
(3). Microvolume inserts are certified to work with all Certified vials for excellent fit with Shimadzu autosamplers. (4). The inserts provide less surface area, making it easier to withdraw a sample. (5). Microvolume inserts are available in two materials: glass and polypropylene (6). 150ul, 29 x 5mm insert
interchim 250ul screw vials 8mm polypropylene 12x32mm glass insert P/N : 177700 Pack : 01 x 100 U. P/N : 177700 Item : 177700 Pack : 01 x 100 U.
Vial Inserts 250ul Glass BM w/Bottom Spring Pack of 100 E-mail this product to a friend Inserts Phase Information: for 2.0 mL, 10 mm Big Mouth Step Design Screw-Thread Vials Polypropylene inserts available on request (1,000-packs only).
250ul Micro Volume Insert,Plastic,Cone Bottom For 9-425 Standard 2ml Lab Hplc Sample Vials. , Find Complete Details about 250ul Micro Volume Insert,Plastic,Cone Bottom For 9-425 Standard 2ml Lab Hplc Sample Vials.,250ul,Plastic Insert,Tiny Bottle from Laboratory Bottle Supplier or Manufacturer-Ningbo Excellent New Material Co., Ltd.
Micro-Insert, 31*6mm Clear, Flat Bottom, Suits for 9mm Vials: 250uL Conical Micro-Insert, 31*5.7mm, Suits for 9mm Vials: 250uL Micro-Insert with Mandrel Interior, & Polymer Feet, 29*5.7mm, Suits for 9mm Vials: 0.3mL Clear PP Short Screw Micro-Vial, 9mm Thread, 11.6*32mm
250uL Conical Micro-Insert 250uL Conical Micro-Insert,31*5.7mm, Suits for 9mm Vials ; Box Package 250uL Conical Micro-Insert,31*5.7mm, Suits for 9mm Vials; White Box Package. 1)Standard vials for GC and HPLC. 2)Clear or amber, borosilicate glass. 3)Broad range of Micro-Inserts. 4)Small opening requires Micro-Inserts with a diameter of 5mm. 5
250ul micro volume glass insert, cone bottom with spring feet. 2ml HPLC autosampler vials screw thread clear glass with black caps Septa alternative to shimadzu set.
• 0.30 mL clear glass inserts • conical springs for glass insert • open top, black phenolic closures • red PTFE/red rubber septa. Suitability Autosampler compatibility: Aijiren A, Series I, II Shimadzu LC Autosamplers Waters 48, 717, 717 Plus
