 hplc vials with micro insert for sale.jpg)
Shimadzu's range of vials. For Research Use Only. Not for use in diagnostic procedures. This page may contain references to products that are not available in your country.
29117-U: Vials, open-top screw cap, 2 mL large opening with closures, unassembled convenience packs volume 2 mL, amber glass vial, thread for 10-425, black polypropylene cap, PTFE/rubber septa, pkg of × 100 ea
Three Features of the Shimadzu LabTotal Vial This improves quantitative accuracy in the analysis of trace basic compounds. This product can be used as a vial for high-sensitivity analysis in conventional LC and in LC/MS analysis.
Wide-Mouthed Vial, with Preset Septum and Cap. This product is designed so that the corners of the bottom of the vial interior can be reached by inserting a 100 μL scale micropipette tip obliquely, which increases the ease of use when inserting and retrieving samples.
Vials, LC, 4mL, 15x45mm, MT-IT Low Volume Vial Set, Clear XLA 100/pk Vials, LC, 500µL Insert for DW-MTP, Amber, 100/pk Vials, LC, 750uL Polypropylene Autosampler Vials Only, 100/pk
If the sample is tissue fragment, add 5–10 mg of sample and extraction solvent to a 2 mL vial. Pulverize the sample using a ball from a ball mill and perform the same extraction, starting with the heated shaking. Fig. 35 Fig. 36 Fig. 37 Fig. 38 Fig. 31 Fig. 32 Fig. 33 Fig. 34
This vial is designed to work in Shimadzu and Waters WISP™ 48 position auto samplers. Choose from clear or amber borosilicate. These vials incorporate the unique Step Vial design that precisely centers a limited volume insert in the neck of the vial. Available with graduated marking
Micro Inserts for 1.5ml vials (fitting for ND9, ND10, and ND11 vials):
Recovery Glass Vials (2714Q59 and S49) 1.5 mL Vials with 30 µL reservoir For sample concentration and injection without transferring to microvolume inserts. Crimp Top Vials with Fixed Inserts (2715G02) Crimp Top Extreme Recovery Vials (2714U76) Patented design with stable base for GC
When using a stainless column, it is necessary to connect a glass insert to a 3.0 mmID column at the side of the injection unit. Please exchange it regularly to avoid poor reproducibility and peak shape caused by the crossover of residual sample, etc. Note: Glass insert cannot be used in a GC-8A Series instrument when using glass columns.
Vial Inserts 250ul Glass BM w/Bottom Spring Pack of 100 E-mail this product to a friend Inserts Phase Information: for 2.0 mL, 10 mm Big Mouth Step Design Screw-Thread Vials Polypropylene inserts available on request (1,000-packs only).
Not having the right consumables can bring your project or lab to a halt. Not all vials are the same, some syringes just do not work, and certain fittings just leak. Do not allow your productivity to be slowed. Ensure you have products that are compatible with your Shimadzu instrumentation.
Glass vials are produced from Type 1 borosilicate glass tubing (clear glass from 33 expansion glass, amber glass from 51 expansion), while our polypropylene vials are manufactured from virgin resins to eliminate the possibility of sample contamination. Septa The PTFE/silicone and modified PTFE/silicone septa are manufactured, conditioned and
Vials, 0.2mL Clear Glass Vial Only w/ fused insert, Short Thread Vial, 12 x 32mm, 9mm opening 100/pk Vials, 1.0mL Clear Glass Vial Only, Short Thread Vial, 12 x 32mm, 9mm opening 100/pk Vials, 1.5mL Amber Glass Vial Only, Short Thread Vial, 12 x 32mm, 9mm opening 100/pk
Vials and Septa to meet your application: 1.5mL, 4mL, 10mL and 20mL headspace vials, EPA screw vials, crimpers and decappers, MS Certified Kits
