Standard opening micro insert with mandrel interior and polymer feet for Aijiren

These inserts are the best choice when using low volumes of biological or basic compounds that might interact or adsorb to borosilicate glass Specifications Part No Size Packaging Description IPA150 29*5mm 100PCS/PK 150ul Insert with mandrel interior and polymer feet, 29*5mm; suits for ND8 Vials IPB250 29*5.7mm 100PCS/PK 250ul Insert with

Please enter a Patterson Item Number in the correct format. Examples are: 123-1234, 123 1234, 1231234, 071231234, 07-123-1234

V4091 - 250uL Insert with mandrel interior and polymer feet, 29*5.7mm, for 9mm Vials, 100ea/pkgV917 - 1.5ml wide opening short screw-thread vial, clear 11.6*32mm borosilicate type 70, 100ea/pkg C9191 - White PTFE/red silicone septa, 9mm blue short screw-thread polypropylene closure, 6mm centre hole, 100ea/pkg ..

of the insert without being damaged. The polymer feet act as a shock absorber. This allows all of the sample to be withdrawn. These inserts are self-aligning and stand straight. Conical Glass Inserts (2714S15) Conical inserts require no springs and are ready to drop into the vial for injections.

250uL Insert with mandrel interior and polymer feet, 29*5.7mm; suits for ND9 Vials . Glass inserts with polymer feet. Conical with precision-formed mandrel interior, 250 μl . Replaces for Shimadzu Inserts, 250uL with bottom spring, used with ND9 2mL Aijiren screw-thread vials . Product Description:

1.5ml Snap Top Vials ND11, wide opening hplc vial with matched PE Snap Top Seals ND11, PTFE/rubber septa & Micro-Insert. Vials with integrated Micro-Insert are available Vials have a 40% larger opening than standard aluminum seal vials for easier sample filling and to reduce the chance of bent or broken needles during sampling.

Mandrel Bending 101 – The Basics Presented to: Agenda: Day 1 – Afternoon in Classroom (4 to 5hrs) 1) Introduction 2) Safety 3) Principles of Rotary Draw Mandrel Bending 4) All about Tooling & Machines 5) Set-up practices Day 2 – Meet in Classroom (1/2hr) and Shop (3.5hrs) 1) Set-up & Tear down bending machines, troubleshoot problems,

The universal Aijiren Max-Light Cartridge Standard Cell with 10 mm optical path length and a dispersion volume of V(s)=1.0 µL is a good choice for most applications on 2.1 mm, 3 mm and 4.6 mm id columns.

KR150 - 150µl insert with mandrel interior & polymer feet. Suits for ND8 Vials. KR250 - 250µl with mandrel interior & polymer feet. Suits for ND9 Vials. K250 - 250µl Micro-insert, flat bottom. Suits for ND8 Vials. K300 - 300µl Micro-insert, flat bottom. Suits for ND9 Vials. X181 - 8mm PE-Plug, soft, w/o insertion. Autosampler Vials

TCO Chemical Injection Mandrel are based on the high-end TCO Chemical Injection Devices. The systems have been a benchmark for a wide variety of global operators since the development of TCO's first purpose-built injection device in 2001.

But Aijiren J&W columns have the widest range of low-bleed standard and stationary phases featuring superior inertness and high upper temperature limits – especially for ion trap MS users. Better precision for better results. Aijiren J&W columns adhere to tight retention factor (k) specifications, promoting consistent retention and separation.

150uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5mm Application: According to different material, they can be devided into two types.

1.Standard vials for GC and HPLC. 2.Vials with integrated Micro-Insert are available. 3.11mm hand crimper & 11mm Decapper. 4.Vials have a 40% larger opening than standard opening aluminum seal vials. 5.Vials are manufactured of Clear or Amber borosilicate glass. 6.The standard 12x32mm profile is compatible with 11mm aluminum seal closures.

Micro-volume “Drop-In” Inserts for use with Standard 8-425 (8mm) Mouth Vials. Compatible with all 2ml Screw Vials, 8-425 Thread Center automatically with flat bottom and mandrel interior

Apr 16, 2019 · For example, polymer marker bands used on balloon catheters are cut from thin-walled polymer tubing with high loadings of tungsten filler to enhance visibility under fluoroscopy. This material is too heavy to retain shape during free-form extrusion and requires support by a mandrel of the inside diameter.