Pure ChromatographyPure Chromatographywww.restek.comLit. Cat.# GNCT2043-UNV © 2015 Restek Corporation. All rights
1-4mL Autosampler Vials for HPLC, UPLC, GC 1.5mL 8-425 Screw Neck Vial ND8 1.5mL 9mm Short Thread Vial ND9 1.5mL 10-425 Screw Neck Vial ND10 1.5mL 11mm Snap Ring Vial ND11 1.5mL 11mm Crimp Ring Vial ND11 4mL 13-425 Screw Neck Vial ND13 1mL Shell Vial Micro-Inserts Vial Racks Hand Crimper, Decrimper
Looking for GRAINGER APPROVED Insert Install Tool, Mandrel, 7/8-9 (5XAP3)? Grainger's got your back. Price $36.75. Easy online ordering for the ones who get it done along with 24/7 customer service, free technical support & more.
Micro-V Vials • Wide opening, 1.5 mL vials with low residual volume • Made from first hydrolytical glass Type 1 • Standard 12 x 32 mm dimension • Compatible with 11 mm crimp closures • Lower cost alternative to high recovery vials Micro-V Vial, snap top, 5184-3552
Microengineered open tubular columns for GC analysis. NASA Astrophysics Data System (ADS) Wiranto, Goib; Haskard, Malcolm R.; Mulcahy, Dennis E.; Davey, David E
KR150 - 150µl insert with mandrel interior & polymer feet. Suits for ND8 Vials. KR250 - 250µl with mandrel interior & polymer feet. Suits for ND9 Vials. K250 - 250µl Micro-insert, flat bottom. Suits for ND8 Vials. K300 - 300µl Micro-insert, flat bottom. Suits for ND9 Vials. X181 - 8mm PE-Plug, soft, w/o insertion. Autosampler Vials
150ul Insert with mandrel interior and polymer feet, 29*5mm; suits for ND8 Vials: IPB250: 29*5.7mm: 100PCS/PK: 250ul Insert with mandrel interior and polymer feet, 29*5.7mm; suits for ND9 Vials: IPB250-P: 29*5.7mm: 200PCS/PK: 250ul Plastic Insert with mandrel interior and polymer feet,suits for ND9 Vials : IA250: 31*5mm: 100PCS/PK
McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.
The mandrel is outfitted with metallic end fittings on a shaft. Each end fitting includes an outer flange that has a small step to accommodate a thin layer of graphite/epoxy or other suitable composite material. The outer surface of the mandrel (but not the fittings) is covered with a suitable release material.
Micro-Inserts & Shell Vials & Racks &Crimper 100pcs/pack. IP150. 150ul Insert with mandrel interior and polymer feet, 29*5mm; suits for ND8 Vials. IP250. 250ul Insert with mandrel interior and polymer feet, 29*5.7mm; suits for ND9 Vials. I200. 200ul Micro-Insert,31*5mm,clear glass,flat bottom; suits for ND8 Vials. I300
Rotary Draw Mandrel Bending 1) The tube must be supported on all surfaces, ID and OD at tangent during bending. Mandrel supports tube on the ID Bend Die supports tube on inside radius of tube OD and provides the radius forming size During bending, the tube is drawn over the mandrel while being supported on all sides. This process induces high
Semi-crystalline Polymer A polymer characterized by areas of order in which molecular chains line up. Semi-crystalline materials tend to have good chemical resistance but higher shrink than amorphous materials. Sink A depression in a molded plastic part caused by a thicker section of plastic shrinking and collapsing as it cools.
The standard ID mandrel works on the simple principal of tightening a threaded draw rod that pulls an end plate. The end plate drives the ramp blocks up an incline, expanding the ramp blocks against the ID bore, locating the tool – both centered and aligned square to the pipe’s center line.
Standard with four wrench flats on mandrel bodies for easier installation to the machine. Dozens of mandrel thread specifications (both inch and metric) are standard at no extra cost. Long-life nickel-aluminum-bronze* nose inserts and mandrel balls for bending high-carbon steel, stainless steel, titanium, and nickel alloy tubing.
Our 12 x 32 mm wide opening vials are most popular for economical and effective microsampling. Its polypropylene body has a glass flanged insert molded to the inside, so the sample comes in contact only with the 100 µL high quality glass insert and the septum. Use with crimp or snap caps.
